XTOOL TS100 PRO Sensor 2 In 1 (315MHz + 433MHz) Programmable Universial TPMS Sensor

XTOOL TS100 PRO Sensor 2 In 1 (315MHz + 433MHz)

XTOOL TS100 PRO The Upgraded Adjustable-angle Design Lets Technicians Fine-tune Sensor Placement for Better Signal, lmproved Fit with Various rims, and Longer Sensor Life! No price increase, Enjoy a More Advanced Version XTOOL TS100 PRO upgraded from XTOOL TS100, Clamp-In OE-Level Programmable Sensor forTire Pressure Monitoring System (TPMS) 100% Cloneable + Fits 98% Mainstream Vehicles. This link is for 10 pieces, enjoy wholesale price directly

Newest XTOOL TS100PRO Sensor 2 in 1–Programmable Universial TPMS Sensor

XTOOL TS100PRO Sensor 2 In 1 which are both smart and efficient specially built for sensor replacement with maximum application coverage, ease of use,OE-levelfit, performance and reliability, will help users economize the cost of diagnostic work and raise the repair efficiency greatly. XTOOL TS100 PRO Clamp-In OE-Level Programmable Sensor for Tire Pressure Monitoring System (TPMS) 100% Cloneable + Fits 98% Mainstream Vehicles, Covers for GMC, for Buick, for Ford, for Mazda, for Toyota, for Lexus, for Nissan, for BMW, for Jeep, for Chrysler, for Acura, for Subaru, for Chevy, for Honda, etc. Replace for OEM Sensors.

It can be activated, can be programmed unlimitedly, can be matched. It can monitor tire pressure in real time, which is perfectly built for your driving safety. XTOOL 2 in 1 TS100PRO Sensor combines both 315MHz + 433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage, whatever your OEM sensor is 315 MHz or 433 MHz, TS100PRO can fit for your car. Offer latest model vehicle coverage because they quickly update during installation with an XTOOL wireless programming tool.

Why buy XTOOL TS100PRO 2 IN 1 Sensors in bulk?

1. 2 IN 1 315MHz & 433MHz Dual Frequencies: XTOOL TS100PRO as a programmable universal sensor featuring in Clamp-in and Snap-in options which are both smart and efficient specially built for sensor replacement with maximum application coverage, ease of use, OE-level fit, performance and reliability, will help users economize the cost of diagnostic work and raise the repair efficiency greatly.

2. Fits 98% Mainstream Vehicles:Universal XTOOL TS100PRO sensors cover 98% of vehicle models. Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 98% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road.

3. Wireless TPMS Programming Sensor:Work XTOOL TP150 WiFi & IP819TP TPMS Programming tool can program the sensor data to the XTOOL-TS100PRO sensor and replace the faulty sensor. Use With The TPMS relearn tool can program XTOOL sensors with unlimited times and program up to 8 sensors at one time.

4. 100% ID Clone-able:XTOOL TS100PRO Sensor is 100% clone-able. No relearn is required when the TS100PRO-Sensor is cloned with the original sensor ID and put in the same position. lower repair cost and to have higher install efficiency

5. Press-in Designed Interchangeable Valve Stems:XTOOL TS100PRO Allows rubber and metal valve stems to freely interchange by hand, without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, An easy-to-use and cost-effective necessity for any shop performing TPMS repairs.

6. The XTOOL TS100PRO Tire Pressure Sensors Pack of 4 is entirely manufactured by XTOOL. With high-performance 5 Year Long battery Life, unlike some cheaper alternatives only 2-3 months, 100% Brand New and Excellent Quality; needs to work with XTOOL TPMS Tool such as TP150 or IP819TP to get programmed.

7. XTOOL TS100PRO Sensor Warranty: XTOOL guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 40,000 miles. better than the Aute* MX-Sensor 2 In 1 (315 + 433MHz) only 24,000 miles, After our technicians’ experiments, the battery life of TS100PRO is 3-5 years！Each sensor is marked with a series number to track the sensor quality from the factory to ensure that only the highest quality parts are installed.

XTOOL TS100 PRO Easy to Use

The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the unique PRESS release valve design makes the manual sensor replacement much easier.

XTOOL TS100PRO Installation Process

1. Loose the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

Program up to 8 sensors at the same time

Work With TP150 TPMS Programming tool can program the sensor data to the XTOOL-TS100PRO sensor and replace the faulty sensor. The TPMS relearn tool can program XTOOL sensors with unlimited times and program up to 8 sensors at one time.

Certified to meet for SAE Standards

XTOOL TS100PRO has Tested & certified to meet SAE standards. Series numbers provide quality control ensuring only high quality parts are usedand guaranteed defect free. Maximum sensor signal strength to program up to 16 sensors wirelessly including sensors already mounted on the wheel.

Turn off TPMS Warning Light

Use with XTOOL TPMS scan tool provides step-by-step guidance for all supported vehicles. After replacing the ts100pro sensor/tire pressure module/receivers/tires, you can reset TPMS and turn off the TPMS warning light. Quickly solve your troubles

Solid & Durable

XTOOL TS100 PRO Equipped with an automotive grade battery, a replaceable aluminum/rubber valve stem to withstand cold, hot and resistance corrosion, and a high-precision air valve to prevent air leakage, this sensor ensures superior stability and performance.

Things to note to ensure you can drive safely

1. The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by XTOOL. Do not install programmed TPMS sensor in damaged wheels.

2. Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.

3. Make sure to program the sensor by XTOOL sensor programming tools for your specific vehicle make, model and year before installation.

4. Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer’ s user guide to confirm proper installation.

XTOOL TS100PRO Need Work With XTOOL TP150/IP819TP

1. TPMS Programming: Use With TPMS programming tool, you can program TS100PRO-sensor to meet the specifications of a particular vehicle before new sensor installation and relearn.

2. TPMS Activation: Use With TP150/IP819TP Help you retrieve TPMS sensor data like Sensor ID, Tire Pressure, Tire Temperature, Sensor Battery, Sensor Position, Frequency, etc at ease.

3. TPMS Relearn: The user can use XTOOL TP150 Wireless TPMS Programming Tool this function to write the newly programmed sensor ID into the vehicle ECU for sensor identification. A total of three sensor learning methods are provided: static learning, self-learning and OBD re-learning

Only when the newly programmed sensor ID is different from the original sensor ID stored in the vehicle ECU, the re-learning operation is required.

4. TPMS Diagnosis: Need Use XTOOL TPMS diagnostic tool TP150/IP819TP can access the vehicle TPMS system, It is used to find out TPMS related problems. You can check sensor-related problems, deflation in the tires and the rotation of wheels. to probe the issue like read codes, pinpoint the fault cause, clear codes and reset the TPMS light, on-screen DTC description to perform DTC Lookup. It can help you find out problems with TPMS system faster. Assists to enhance the tire performance and maintain tire health.

XTOOL TS100PRO 98% Vehicle Coverage

Only Need 1 XTOOL TS100PRO-Sensor to service nearly every TPMS equipped vehicle to support up 98% of North American, European and Asian brands. As an easy to use and cost effective necessity for any shop performing TPMS repairs, Greatly save your budget!

TS100PRO With Wide Compatibility: TS100PRO Tire Monitor sensor covers for for GMC/for Buick/for Ford/for Mazda/for Toyota/for Lexus/for Nissan/for BMW/for Jeep/for Chrysler/for Acura/for Subaru/for Chevy/for Honda/for Silverado/for Lincoln/for Dodge/for Cadillac/for Buick, etc; Europe: for Bentley/for VW/for Skoda/for Porsche/for Opel/for Vauxhall/for Fiat/for Peugeot/for Citroen/for Volvo/for Mini/for Land Rover/for Renault, etc