Adblueobd Euro 6 OBD2 Engine Fault Diagnosis Instrument for DAF

nitro group adBlueOBD2 for Daf Euro 6 460 480 Remove

You must attach the adBlueOBD2 to the rear of the silencer under the EASecu.

You must first disconnect the nox sensor cables and connect the adBlueOBD2 cables to theNOxcables.

you must obtain fuseoF22 (e497 15A)

CAN cables are located at the top of the NOx socket.

Carsidemutator side

CAN H———————–WHITE cable

CAN L———————— BROWN cable

POWER(+)——————–REDcable

GND(-)———————— Black cable

IMPORTANT NOTE:Only the CANcables are to be connected from the NOx socket as the truck’sfuse has been taken.For power connections you need to use ground (GND) and contact(+).

Youmust clear the error codes from the engine ECU, If you do not have DAVIE software, you canus DAFEuro 6 DTC Eraser.

The connection type DAF460/480 is the same but the NOx socket locations are different.