Adblueobd Euro 6 OBD2 Engine Fault Diagnosis Instrument for Iveco

EURO 6 adblueobd2 adblueobd for IVECO Installation

IVECO Stralis

adblueobd2 adblueobd for iveco Euro 6 not need to be learned.We fit adblueobd under the cover of adblueobd2 tank (behind of right front wheel)

SCR system in Iveco Euro 6 is not typical. All aftertreatment process is managed by engine ECUEDC17Cv41 there is no additonal adblueobd2 ECU system. So some of the components connected direcly to engine ECU should be electrycally operating property, (adblueobd2 injector, directional Valle, temperature sensors）

Adblueobdreplaces the work：

Nox Sensor(downstream）

Nox Sensor(upstream)

NH3 Sensor

CAN wires we need connect separetly

The best place for it is plug ST55A (you can find it on the vehicle frame, right side of engine,above the right front wheel)

WHITE- to pin 22 (CAN H)

BROWN-to pin 21(CAN L)

Now only we need connect power (adblueobds red cable as VCC and black cable as GND)toignition power.Just remove the fuse NUMBER 70405 from 4th block.

For Iveco Eurocargo

adblueobdVehicle side

WHITE (CAN H)—————- NoX Socket 4 pin

BROWN (CAN L)—————NoX Socket 3 pin

Red (positive +)—————-adblueobd2socket 9 pin (7542)-(or ignition contact Line)

Black(GND-)——————–adblueobd2socket 8 pin(o549)-(or chassis to print)

Remove the fuse number 3(15A)at block 70000/2 from the fuse box. Erase any errors.