Aermotor BM300 12V Car Battery Tester Auto Car Battery Analyzer Circuit Electrical System OBD2 Scanner BM300 Battery Tester

Product Introduction

1. The Aermotor Battery Tester is an application assistant specifically designed for automotive battery batteries. This is a practical APP,users can view the real-time voltage and other relevant information of the car battery in real time through the mobile phone.

2. The voltage of the car starting system and charging system can be monitored in real time, helping users to fully understand the data and characteristics of the car battery battery.

3. Transfer data to the phone via Bluetooth and enter the APP for real-time viewing.

Functions

Compatible with all 12V vehicle batteries and installed in the car battery Real-time monitoring via mobile phone app.
Check the starting system (cranking) at each engine start and check the starting voltage every hundredths of a second when the engine starts
Engine start is automatically detected and check the charging and starting systems (alternator)
Receive battery condition notification when you enter bluetooth range and notify mobile phone when some data is abnormal
View short circuit and reverse connection protection and voltage and charge information. When the user is close to the vehicle, the app does not need to be opened
Automatically syncs when entering Bluetooth range and data stored in battery monitor for up to 35 days if out of sync.
List the time of each trip and check historical data graphically.

Multi-Language Support

Parameters

1. Name: Car battery detector

2. Model:BM300

3. Working voltage: 6V-18V

4. Working temperature:-40-60°℃

5. Function: Low-power protection chipeffectively protect the power consumption of the battery, the voltage exceeds 20V or the product temperature exceeds60℃ The chip will enter the protection mode and stop working.Wait for the voltage to be normal and the temperature to be normal and continue normal operation.

Operation Method

1. Android operation method:Open the phone settings – Bluetooth – select to pair AERMOTOR-app, enter the APP after successful connection,click the setting icon in the upper right corner, find AERMOTOR-app in the device management to connect, and test after successful connection.

2. IOS operation method:Open the mobile phone settings – make sure that the Bluetooth is turned on and go directly to the APP click the setting icon in the upper right corner,find AERMOTOR-app in the device management to connect, and test it after the connection is successful.

3. Install the red end on the positive terminal of the battery.

4. Install the black end on the negative terminal of the battery.

Parameters

1. Name: Car battery detector

2. Model:BM300

3. Working voltage: 6V-18V

4. Working temperature:-40-60°℃

5. Function: Low-power protection chipeffectively protect the power consumption of the battery, the voltage exceeds 20V or the product temperature exceeds60℃ The chip will enter the protection mode and stop working.Wait for the voltage to be normal and the temperature to be normal and continue normal operation.

Operation Method

1. Android operation method:Open the phone settings – Bluetooth – select to pair AERMOTOR-app, enter the APP after successful connection,click the setting icon in the upper right corner, find AERMOTOR-app in the device management to connect, and test after successful connection.

2. IOS operation method:Open the mobile phone settings – make sure that the Bluetooth is turned on and go directly to the APP click the setting icon in the upper right corner,find AERMOTOR-app in the device management to connect, and test it after the connection is successful.

3. Install the red end on the positive terminal of the battery.

4. Install the black end on the negative terminal of the battery.